Dual Battery Solar Charge Controller 10Amp and MT-1 Remote Meter

$188.00

Add to Cart:
  


Dual Battery Solar Charge Controller 10Amp

& MT-1 Remote Meter

Dual Battery Solar Charge Controller 10Amp

EPIPDB-COM series can charge two batteries at the same time. No load terminals. Two batteries charging from the one regulator eliminates the extra cost of two separate solar charging systems
 
This regulator works well for boats with dual batteries. The isolator switch can be turned off but the solar panel can still charge both batteries. 
 
  • Intelligent System Optimum Control
  • 12/24V auto work
  • Battery type selection
  • Charging frequency optional
  • High efficient Series PWM charging
  • Local external temperature compensation
  • Remote temperature sensor optional
  • Use MOSFET as electronic switch, without any mechanical switch
  • Remote meter MT-1 optional (LCD display Meter)
  • Load and battery status indicators
  • Electronic protection: over charging, short circuit, battery reverse polarity protection
 
Application:
RVs, Caravans, bus, boats etc.
 
Model Selection:
EPIPDB-COM 10A, 12/24V AUTO
Ideal for off-grid solar system up to 120W, 12V or 270W,24V

 


MT-1 REMOTE METER

Remote Digital Display for 10Amp/20Amp EP Solar Duo- Battery Solar Charge Controller. Displays both Solar and Battery Voltage as well as Charging and Load Current. Shows Amp-Hour and Watt-Hour charge accumulation as well as Battery charge percentage. Easy to use and program and is ideal for quick system checks. Can be flush mounted in a wall or surface mounted using the Mounting Frame (included). Supplied with a 10m Cable.
 
Features:
  • Full Digital Display showing Voltage, Current, Amp-Hours, Watt-Hours and Battery Percentage Charge.
  • Suitable for 12V and 24V Systems
  • Temperature Display
  • User friendly interface
  • Full Installation Instructions Included
 
Specification:
  • Rated Voltage 12V, Min Voltage (suggest): 8.0V
  • Strong Backlight on <23mA
  • Low Backlight on <20mA
  • Backlight and LED indicator off <17mA
  • Operation temperature -40℃ ~ +60℃
  • LCD operation temperature -10℃ ~ +40℃
  • Humidity 0-100%
  • Communication cable RJ45(8PIN), 10 meter
 
 


  • Model:
    [EPIPDB-COM10A+MT1]


Ask a question



 

Sorry we ran out!

Fill out this form and we will let you know when it comes back in stock