Single 95W Solar Panel ABS Package



This Package includes:
  • 1 x 95W Curtech Monocrystalline Solar Panel
  • 1 x ABS Corner Heavy Duty Solar Panel Mounting Bracket (Set of 4)
  • 1 x ABS Heavy Duty Long Solar Panel Mounting Bracket (Set of 2)
  • 1 x Curtech 10Amp 12V Water Resistant LCD Solar Charge Controller
  • 1 x ABS Flanged Roof Top Wire Housing
  • 1 x 7m of Black & Red Solar Wire with MC4 Connector
  • 1 x 20Amp Maxi Fuse
  • 1 x Maxi Fuse Holder
  • 2 x Battery Eyelets
  • 1 x 10cm of Black Heat Shrink
  • 1 x 10cm of Red Heat Shrink
The 95W solar panel has
  • a strong 35mm aluminium frame.
  • Toughen glass.
  • Wire attached with MC4 connectors.
  • Mono Crystalline "A" Grade Solar Cells.
  • Suitable for 12V charging when hooked to a suitable regulator.
  • Multiple panels can be wired together to produce power suitable for 24V charging when hooked to a suitable regulator.
The ABS brackets are designed to give the solar panel a space under the solar panel to allow for air flow. This helps keep the panel cooler and allows the panel to preform to its best ability.
The corner brackets help reduce the square aluminium corners on the solar panel. This helps reduce covers being caught on the solar panel.
The short brackets are to support the side of the panels to reduce any flexing which may occur when travelling.
The brackets should be installed using a Sikaflex-252 product.
This removes the need for screwing the brackets to your roof reducing the possibility of water leaks.
The brackets are UV stabilised.
The 10Amp LCD Regulator controls the charging of the battery/batteries hooked to the solar array.
The unit can be flush mounted or directly mounted to a flat surface.
The roof top wiring block covers the wires which go through the roof to the solar regulator. It carries the wires from the solar panels to the regulator.
The wire in this package plugs directly into the panels wires. Upgrading to a dual panel system is made easy buy using this type of connection. To add an additional panel a 'Y' Connector can be installed and the second panel can be connected to the existing wire with no addition wiring.
Click the links below to view individual specifications of each item in the package.

Please note when calculating the size of the area required to install this package add 120mm to the length and the width of each solar panel. This is to include the brackets in the overall size.

  • Model: [CT-ABSS95]

Ask a question

Customers who bought this product also purchased...

Sorry we ran out!

Fill out this form and we will let you know when it comes back in stock