Solar Beam Sensor & Alarm Receiver



Solar Beam Sensor

Solar-powered, no external power cord required.
Radio Frequency (RF) Hopping & FM Signal Alarm, no external signal wire required, no wireless signal interference, no reception error, no false alarm.
Adoption of data coding scheme ensures no coincident code among 60000 pairs of light walls.
Immune to strong light interference, with interference indication function.
Equipped with the functions of self-check and reporting to the host.
Equipped with the function of reporting to the host about any offset due to such causes as wind blowing after installation.

Alarm Receiver

This Alarm Receiver has a minimum power consumption of only 0.3 Watt. Used with our Solar Beam Sensor, make your home safer and the earth greener.
The receiver uses power supply from a standard wall outlet and can be placed on a table or mounted on the wall.
When receiver gets a signal from the Detector one of 4 different tones (beep, wind-bell, plink, clarino) will sound for about 8 seconds. There is also a volume control so you can set the sound to the desired level. The receiver is also equipped with 4 form “c” relays (one for each zone) and one 14VDC output terminal that can activate when a signal is received.
The receiver can be user programmed so the 14VDC terminal and relays will activate for 1 second,10 seconds, 60 seconds or 5 minutes. the tones will sound for several seconds.
Please Note: for maximum range between the Detector and receiver, the receiver should be mounted horizontally on a wall and as high off the floor as possible. Although the maximum range is about 300-800 meters, things such as hills, trees, metal siding and stucco can all reduce the range.

Solar Beam Sensor

Working voltage: 3.3V

Battery Type: LiFePO4 battery

Battery capacity: transmitting terminal 500mAh, receiving terminal 1000mAh

Static working current: transmitting terminal ≤ 0.5mA, receiving terminal ≤ 0.5mA

Infrared light frequency: secondary modulation and coding on the basis of 38KHz

Infrared light wavelength: 940nm ± 20nm

Number of infrared beams: 2 beams

Wireless transmitting frequency: 433MHz FSK+FHSS

Infrared distance: 100m

Wireless transmitting distance: 1km

Solar electrical panel output current: ≥2mA at an illumination level of 1800Lx (Note: outdoor illumination intensity in rainy days is about 2000Lx)

Working environment temperature range: -30°C~70°C

Maximum alarm times in 24 hours: ≤50 times

Overall dimension: 265×84×45 mm

Alarm Receiver

Frequency: 434.6MHz

Operating voltage: 15VDC

Operating current: Standby 20mA, Alarming 180mA

14volt DC output current: 400ma maximum

Relay rating: 24VDC or 120VAC at 2A


  • Model: [CT-ASBS+AR]

Ask a question

Sorry we ran out!

Fill out this form and we will let you know when it comes back in stock