Alarm Receiver

$205.00

Add to Cart:
  


Alarm Receiver

This Alarm Receiver has a minimum power consumption of only 0.3 Watt. Used with our Solar Beam Sensor, make your home safer and the earth greener.

 

The receiver uses power supply from a standard wall outlet and can be placed on a table or mounted on the wall.

 

When receiver gets a signal from the Detector one of 4 different tones (beep, wind-bell, plink, clarino) will sound for about 8 seconds. There is also a volume control so you can set the sound to the desired level. The receiver is also equipped with 4 form “c” relays (one for each zone) and one 14VDC output terminal that can activate when a signal is received.

The receiver can be user programmed so the 14VDC terminal and relays will activate for 1 second,10 seconds, 60 seconds or 5 minutes. the tones will sound for several seconds.

 

Please Note: for maximum range between the Detector and receiver, the receiver should be mounted horizontally on a wall and as high off the floor as possible. Although the maximum range is about 300-800 meters, things such as hills, trees, metal siding and stucco can all reduce the range.

Frequency: 434.6MHz

Operating voltage: 15VDC

Operating current: Standby 20mA, Alarming 180mA

14volt DC output current: 400ma maximum

Relay rating: 24VDC or 120VAC at 2A



  • Model:
    [SCA-AR]


Ask a question


 

Sorry we ran out!

Fill out this form and we will let you know when it comes back in stock