Solar Beam Sensor



Solar-powered, no external power cord required.

Radio Frequency (RF) Hopping & FM Signal Alarm, no external signal wire required, no wireless signal interference, no reception error, no false alarm.

Adoption of data coding scheme ensures no coincident code among 60000 pairs of light walls.

Immune to strong light interference, with interference indication function.

Equipped with the functions of self-check and reporting to the host.

Equipped with the function of reporting to the host about any offset due to such causes as wind blowing after installation.

Working voltage: 3.3V

Battery Type: LiFePO4 battery

Battery capacity: transmitting terminal 500mAh, receiving terminal 1000mAh

Static working current: transmitting terminal ≤ 0.5mA, receiving terminal ≤ 0.5mA

Infrared light frequency: secondary modulation and coding on the basis of 38KHz

Infrared light wavelength: 940nm ± 20nm

Number of infrared beams: 2 beams

Wireless transmitting frequency: 433MHz FSK+FHSS

Infrared distance: 100m

Wireless transmitting distance: 1km

Solar electrical panel output current: ≥2mA at an illumination level of 1800Lx (Note: outdoor illumination intensity in rainy days is about 2000Lx)

Working environment temperature range: -30°C~70°C

Maximum alarm times in 24 hours: ≤50 times

Overall dimension: 265×84×45 mm


  • Model: [CT-ASBS]

Ask a question

Sorry we ran out!

Fill out this form and we will let you know when it comes back in stock