100W Semi Flexible Solar Panel



3mm thick solar panel used widely in the marine industry and camping for charging 12V batteries.
The solar cells are "A" grade American.
Installation of the panel can be done permanently by using an adhesive to stick the panel down or screwed down using the preinstalled eyelets. The mounting surface does not have to be completely flat as the panel is able to curve in a semi flexible manner to adhere to most surfaces.
The panel comes with 600mm of wire including MC4 Connectors.
The wiring block is on the front of the panel so the panel can be installed flat to a surface.
This size panel is great to keep your batteries charged when on the extended fishing/camping trip or just for those days on the water or camping when you need lots of power put back into your 12V batteries.
This panel can be connected to a dual battery solar controller and charge two 12V batteries at the same time.
This panel can also be used to maintain any 12V battery when hooked to a suitable 12V regulator.
Module size (mm)
1050 x 540 x 3
Weight (kg)
Maximum Power (Pmax)
Maximum Power Voltage (Vmp)
Maximum Power current (Imp)
Open circuit voltage (Voc)
Short circuit current (Isc)
Maximum system voltage
600V DC

Please note there is protective plastic covering the panel in the photos.
This has to be removed after installed.

  • Model: [CT-SF100]

Ask a question

Sorry we ran out!

Fill out this form and we will let you know when it comes back in stock